Bosch Go cordless screwdriver allows you to screw and unscrew screws with a diameter of up to 5 mm in automatic and manual mode. The screwdriver is sold in a small plastic case with snaps. The package includes: charger, USB cable, a set of thirty-two bits with a holder and a user manual. The screwdriver is 182 mm long, the case is made of rubberized plastic, which provides a reliable grip without slipping. The hex hole for setting the bit is equipped with a magnet. At the end of the screwdriver there is a strap for hanging on the wrist and a Micro-USB port for charging the built-in lithium-ion battery with a capacity of 1.5 Ah (voltage 3.6 V). A fully discharged battery up to 100% capacity is restored in 1 hour 45 minutes. Bosch Electronic Cell Protection (ECP) technology protects the battery from overload and overheating. A three-section LED indicator is located at the end of the device. At the end there is a torque adjustment wheel with six levels. The maximum torque with hard twisting is 5 N · m, with soft - 2.5 N · m. Rotation speed without load - 360 rpm. On the screwdriver case there is a three-position mode switch - screwdriving, neutral position and reverse. In the neutral position, the screwdriver can be used in manual mode. Bosch Go cordless screwdriver weights just 280 grams. For comparison: this is two and a half times less than the mass of a compact cordless drill / screwdriver Bosch GSR 12V-15 FC Professional. True, the scope of the cordless screwdriver is narrower. To use a Bosch Go cordless screwdriver, you must select the appropriate bit, select the mode of operation and torque. To automatically tighten, you need to slide the mode switch forward and push on the screwdriver. This is the so-called push & go method. After tightening the screw, stop pressing on the screwdriver - and the E-clutch intelligent coupling will stop the motor. For automatic inversion, you need to move the mode switch to the reverse position and press on the screwdriver. If the battery is dead or you just need to use the screwdriver in the classical way, then the mode switch must be put in the middle position. In the same position, you can check the charge level by pressing on the bit holder. In addition to standard bits, you can use socket heads, for example, for twisting self-tapping screws into metal. The Bosch Go cordless screwdriver has enough power to completely screw a 5 mm diameter screw into the wood. This means that screws with a larger diameter cannot be fully tightened in automatic mode. Have to twist your hands. The Bosch Go cordless screwdriver is four times more powerful than similar products. With its help, you can engage in electrical installation, assemble or disassemble furniture. Wherever you need a screwdriver - the Bosch Go cordless screwdriver will be on top and will save time and effort. Note the convenient and reliable palm grip of the screwdriver, intuitive controls, the ability to adjust the torque and use the standard Micro-USB port for charging.